常州精密钢管【常州钢管】精密钢管博客

【常州市精密钢管厂博客网站】-www.josen.net- (争做钢管百科全书) (专做高要求钢管) (常州精密钢管博客网微信公众号百度百家号熊掌号都是:steeltuber)

« Non-destructive inspection for other than sour service or offshore serviceAcceptable manufacturing routes for PSL 2 pipe »

CVN absorbed energy requirements for pipe body of PSL 2 pipe

CVN absorbed energy requirements for pipe body of PSL 2 pipe

Specified outside
diameter
D
mm (in)
Full-size CVN absorbed energy,
minimum
Kv
J (ft.lbf)
Grade
≤ L415 or
X60
> L415 0r X60
≤ L450 or X65
> L450 or X65
≤ L485 or X70
> L485 or X70
≤ L555 or X80
> L555 or X80
≤ L625 or X90
> L625 or X90
≤ L690 or X100
> L690 or X100
≤ L830 or X120
≤508 (20. 000) 27 (20) 27 (20) 27 (20) 40 (30) 40 (30) 40 (30) 40 (30)
>508 (20.000) to
≤762 (30.000)
27 (20) 27 (20) 27 (20) 40 (30) 40 (30) 40 (30) 40 (30)
>762 (30.000) to
≤914 (36.000)
40 (30) 40 (30) 40 (30) 40 (30) 40 (30) 54 (40) 54 (40)
>914 (36.000) to
≤1 219 (48.000)
40 (30) 40 (30) 40 (30) 40 (30) 40 (30) 54 (40) 68 (50)
>1 219 (48.000) to
≤1 422 (56.000)
40 (30) 54 (40) 54 (40) 54 (40) 54 (40) 68 (50) 81 (60)
>1 422 (56.000) to
≤2134 (84.000)
40 (30) 54 (40) 68 (50) 68 (50) 81 (60) 95 (70) 108 (80)

9.8.3 Pipe weld and HAZ tests


The minimum average (of a set of three test pieces) absorbed energy for each pipe weld and HAZ test, based upon full-size test pieces and a test temperature of 0 °C (32 °F), or if agreed a lower test temperature, shall be

a) 27 J (20 ft.lbf) for pipe with D < 1 422 mm (56.000in) in grades ≤ L555 or X80;

b) 40 J (30 ft.lbf) for pipe with D ≥ 1 422 mm (56.000 in);

c) 40 J (30 ft.lbf) for pipe in grades > L555 or X80.

NOTE      The HAZ of the longitudinal seam weld in HFW welded pipe is usually too narrow to permit accurate sampling for Charpy testing. The requirement for Charpy testing of the seam weld HAZ applies only to SAWL/SAWH and COWL/COWH pipe.





本站优秀文章:

博客主:精密钢管博客网:www.josen.net


Copyright:常州精密钢管博客 苏ICP备08003692号,常州精密钢管,江苏精密钢管,常州精密钢管厂,江苏精密钢管厂
生产供应: 无缝钢管, 精密钢管, 精密无缝钢管, 流体输送管, 精密机械管, 油路管, 热交换器管, 油管, 套管, 无氧退火管, 等多种钢管。