常州精密钢管博客网

ASTM A106 高温作业用碳素钢无缝钢管 标准下载

ASTM A106 无缝钢管是用于输送水、油、气等高温流体的一种无缝钢管。

美标ASTM A106-ASME SA106 用于输送水、油、气等高温流体。A106A、A106B、A106C A106gr.b


主要机械性能:

无缝钢管标准

钢管牌号

抗拉强度(MPA)

屈服强度(MPA)

ASTM A106

A

≥330

≥205

B

≥415

≥240

C

≥485

≥275


主要化学成分:

钢管标准

钢管牌号

A106无缝钢管化学成分

C

Si

Mn

P

S

Cr

Mo

Cu

Ni

V

ASTM A106

A

≤0.25

≥0.10

0.27~0.93

≤0.035

≤0.035

≤0.40

≤0.15

≤0.40

≤0.40

≤0.08

B

≤0.30

≥0.10

0.29~1.06

≤0.035

≤0.035

≤0.40

≤0.15

≤0.40

≤0.40

≤0.08

C

≤0.35

≥0.10

0.29~1.06

≤0.35

≤0.35

≤0.40

≤0.15

≤0.40

≤0.40

≤0.08

注:① 在规定的最大碳含量以下,碳含量每降低0.01%,则允许A106无缝钢管在规定的最大锰含量之上各增加0.06%的含锰量,但最大不得超过1.35%;
              ②Cu、Ni、Cr、Mo、V这五种元素之和不得大于1.00%


主要尺寸公差:

美标管种类

美标管外径(D)

美标管壁厚(S)

冷拔美标管

钢管外径

钢管允许公差

壁厚

钢管允许公差

>30~50

+0.3%

≤25

+10%

>50~325

+0.8%

热轧美标管

>6~168

+1.0%

≤25

-10%,+12.5%


原版英文介绍:

Abstract

This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification2 covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1/8 to NPS 48 [DN 6 to DN 1200] (Note 2) inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.

NOTE 1: It is suggested, consideration be given to possible graphitization.

NOTE 2: The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”

1.2 Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents (purchase separately)

ASTM Standards

A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing

E309 Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation

E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

Other Standards

SSPC-SP6 Surface Preparation Specification No. 6 Available from Society for Protective Coatings (SSPC), 40 24th St., 6th Floor, Pittsburgh, PA 15222-4656, 

Federal Standard

Fed. Std. No. 123 Marking for Shipments (Civil Agencies)

Fed. Std. No. 183

ASME Standard

ASME B36.10M Welded and Seamless Wrought Steel Pipe Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Two Park Ave., New York, NY 10016-5990, 

Military Standards

MIL-STD-129 Marking for Shipment and Storage Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.

Keywords

Carbon Steel - High-Temperature Services - Seamless Pipes And Tubes - Seamless Steel Pipes

ICS Code

ICS Number Code 23.040.10 (Iron and steel pipes)

UNSPSC Code

UNSPSC Code 40171602(Industrial seamless carbon steel pipe)


标准文件下载:


ASTM A106 高温作业用碳素钢无缝钢管 标准下载

请关注微信公众号:steeltuber 后回复 A106 即可获得 完整的下载 网址。

 还可直接扫描下方二维码关注。

常州精密钢管博客-微信公众号:steeltuber


(关注:微信公众号 steeltuber

目前100000+人已关注加入我们

      

     




图片加载中...
❤ 请关注 微信公众号: steeltuber.
 转载请保留链接: http://www.josen.net/Download/ASTM-A106.html

精密钢管,无缝钢管,电机壳钢管,汽车用钢管,汽车管件生产厂家

推荐阅读 →

搜索本站钢铁技术
★↓在此搜索查找钢铁材料知识↓★↘


★↓在此搜索钢材钢管生产厂家产品信息↓★↘


★↓百度站内搜索本站钢材知识信息↓★↘

常州精密钢管博客网分享如下知识与信息:江苏常州钢管生产厂家|钢铁知识|钢厂钢铁行业资讯|钢材价格|钢管现货规格|冷拔钢管|冷轧钢管|热轧钢管|行业信息分享|无缝钢管|精轧钢管|精密钢管|精密钢管厂|精密无缝钢管|无氧退火钢管|高精度钢管|常州钢管|江苏钢管|钢管厂|精拉钢管|江苏钢管厂|光亮管|钢管技术|等相关的知识技术与信息。

«   2020年3月   »
1
2345678
9101112131415
16171819202122
23242526272829
3031
精密钢管博客友链
钢材厂商推荐

常州精密钢管博客网主办单位: 常州仁成金属制品有限公司

百度移动端直接搜索:steeltuber 百度电脑端直接搜索:精密钢管博客网 都能找到本站.

友情链接:

常州精密钢管博客网(常州仁成金属钢管制品生产厂家官方博客网站) www.josen.net©2006-2020苏ICP备08003692号-1

文章下载(PDF)关于本站本站APP文章列表◉常州钢管哥◉(抖音)网站地图百度搜索本站精密钢管博客快站模拟电脑访问



分享:

支付宝

微信

扫一扫,想赞多少就多少~

本站会员尊享信息推送下载及留言特权,现在就加入我们吧!登录注册
登录
用户名
密码
注册
用户名
密码
确认密码
昵称
邮箱
获取邀请码
邀请码
找回密码
用户名
邮箱
※ 重置链接将发送到邮箱